Plumber Services Richmond Upon Thames

To minimise the chances of encountering a plumbing emergency in your home or business, consider implementing the following measures:

• Regularly inspect pipes and faucets for leaks
• Utilize water alarms to detect leaks early on
• Insulate pipes in areas that are not heated
• Refrain from flushing inadmissible items down the toilet
• Schedule routine maintenance checks with a professional plumber
• By following these preventive steps, you can save yourself a significant amount of stress, money, and protect your property from potential damage.

Identifying the need for a plumber should not be difficult, However, here are some common indicators to look out for:

• Leaks from taps or toilets that are constantly running or dripping
• Sinks or bathtubs that drain slowly
• Decreased water pressure
• Unusual sounds from pipes
• Water damage on ceilings, walls, or floors
• An unexplained spike in your water bill
• If you are encountering any of these symptoms, it is advisable to contact a professional plumber for an inspection and repair.

Clearing a blocked toilet can vary in difficulty depending on the reason for the blockage. Here are some steps to consider:

• Use a plunger by placing it over the opening and pushing down firmly.
• Attempt to remove the blockage using a toilet auger, especially if it’s deep in the pipes.
• If these methods fail, it’s best to call a professional plumber as the clog may be due to a serious issue.
• Remember to act quickly when dealing with a clogged toilet to prevent overflowing and further damage.

A constantly running toilet can be caused by a number of different things, below are just a few;

• A damaged or worn-out flapper valve
• A malfunctioning fill valve
• An obstructed or misaligned flush valve
• A broken toilet handle
• A clogged drain
• If you are experiencing a running toilet, it is best to contact a professional plumber for a proper diagnosis and repair.

Finding a leak in your toilet system can be made easy with these simple tests:

• Dye Test – Introduce dye tablets into the toilet tank water, then wait for 20-30 minutes. If the toilet bowl water changes to the same color as the dye, it indicates a leak.
• Food Coloring Test – An easier alternative is to use food coloring, drop a few in the toilet tank, then check the bowl after 15 minutes. If the water in the bowl changes color, you have a leak.
• Meter Test – Check the water meter before and after a time when no water is being used. If the meter has moved, it could be a sign of a leak.

If you suspect a leak in your toilet, it’s always advisable to call in a professional plumber for a proper diagnosis and repair.

A sudden spike in your water bill could be a sign of a leak somewhere. The best place to start is by checking your water meter. Here’s how;

• Turn off all water appliances and fixtures.
• Take a reading of your water meter.
• Wait for about an hour then take another reading. If the numbers have changed, it may indicate a leak.
• Additionally, keep an eye out for any visible signs of leaks, such as water stains, dampness, or mold on walls, floors, or ceilings.

If you’re unsure, it would be wise to bring in a professional plumber for a leak detection service. They will be able to locate the leak using advanced equipment, that you will likely not have on hand.

If you suspect you have a leak at the base of your toilet, You can test it by following the steps below – the most common cause is a damaged wax ring or toilet flange.

• Turn off the water supply to the toilet.
• Remove the toilet tank.
• Inspect the wax ring and flange for any cracks or signs of damage.

Time is of the essence when it comes to fixing a leak at the base of the toilet. This type of leak can cause water damage and lead to mold growth if not addressed promptly. If you’re not confident in your ability to fix the leak, don’t hesitate to call a professional plumber like us, for help.

A leaking tap can be a minor irritant, but will lead to increased water bills if left. If you’re going to give it a go yourself – Follow the steps below;

• Turn off the water supply to the tap.
• Remove the tap handle to access the valve.
• Inspect the valve for any signs of wear or damage and replace it if you find an issue.
• Put the tap back together, and turn the water supply back on.

However, if you’re not confident in your ability to repair this, it’s best to call a professional plumber like us. As we can thoroughly inspect and fix the issue to prevent any further damage, or water waste.